© 2021 Eight Legged Media. All Rights Reserved.
This product is not Pre-Printed. Option to select material and imprint color: The Shown Lab-Coat design will be included with your submitted art and will print in the same ink color. If you elect to have the Lab-Coat design printed in a different color other than your submitted artwork, it will be necessary to increase the quantity to 250 pieces to meet our multi-color minimum. Additional run color and Screen charges will apply. Option to incorporate your Lab-Coat design into unique die-cut shape. View below product description
|$1.59 (R)||$1.59 (R)||$1.59 (R)||$1.59 (R)|
·1/8″ High-Density Scuba Foam – Holds standard 12oz Can
∙Approximate Item Size: 4 “H X 4” W
∙Imprint Area: 3 ½” x 3 ½” Side – 1 ¾” Bottom (Side 1 Varies on the Chosen Item Imprint)
∙Screen/Setup Charge: $50.00(V) per Color
∙Assorted Colors within an Order: 50 per Color Minimum – $3.00(Z) each Color
∙Multi-Color Imprint: 250 Pieces Minimum Required – Max 2 spot ink colors
∙Additional Color Charge: $.30(V) each
∙Handling Charge: A $3.00 (Z) per carton will apply.
∙26-Scuba Foam Colors shown on Page 51. Add $.25(V) for Camo-Tan & Camo-Green. Displayed Colors are a close tonal match only; Not Exact.
·Due to the laminated surface of these products, detailed Art and halftones are not possible. Color and foam consistency may vary within and from order to order but is considered acceptable and within industry standards.
·Parallel Sewing: Due to the stretch and consistency of the material total seam registration is not possible. Therefore, the piece will not match evenly on each side of the printed/sublimated piece.
·View Page 53-54 for General Information and Art Acceptance